130
Figure 113
Creating an SNMP Community
4.
Configure the SNMP community as described in
Table 35
.
5.
Click
Apply
.
Table 35
Configuration items
Item Description
Community Name
Set the SNMP community name.
Access Right
Configure SNMP NMS access right:
•
Read only
—The NMS can perform read-only operations to the MIB objects when
it uses this community name to access the agent.
•
Read and write
—The NMS can perform both read and write operations to the
MIB objects when it uses this community name to access the agent.
View
Specify the view associated with the community to limit the MIB objects that can be
accessed by the NMS.
ACL
Associate the community with a basic ACL to allow or prohibit the access to the
agent from the NMS with the specified source IP address.
Configuring an SNMP group
1.
Select
Device
>
SNMP
from the navigation tree.
2.
Click the
Group
tab.
The
Group
tab appears.
Figure 114
Group tab
Summary of Contents for Compaq Presario,Presario 1910
