HP Compaq NX7000 Reference Manual Download

Page: 46 / 158

Keyboard

Initiate Standby (Fn+F5)

The

Fn+F5

hotkeys are set by default to initiate Standby. Standby

can be initiated only while the notebook is on. If the notebook is
in Hibernation, you must restore from Hibernation before you
can initiate Standby.

To restore from Hibernation or resume from Standby, briefly
press the power button. For more information about using
Standby and Hibernation, refer to Chapter 4 “Power”.

For information about changing the function of the

Fn+F5

hotkeys, refer in Chapter 4 to the “Setting Power Control
Preferences”

section.

Initiate QuickLock (Fn+F6)

The

Fn+F6

hotkeys initiate the operating system QuickLock

security feature. The QuickLock feature disables the keyboard
and displays the log on screen. QuickLock does not disable the
TouchPad.

Before you can use the QuickLock feature, you must set a
Windows system password. For instructions, refer to your
operating system documentation.

After you have set a Windows system password:

To initiate QuickLock, press

Fn+F6

To exit QuickLock, enter your Windows system password.

Decrease Brightness (Fn+F7)

The

Fn+F7

hotkeys decrease notebook screen brightness.

Increase Brightness (Fn+F8)

The

Fn+F8

hotkeys increase notebook screen brightness.

Startup and Reference Guide––Part 2

3-7

Summary of Contents for Compaq NX7000































































































































































Search results

Summary of Contents for Compaq NX7000

Reviews:

Related manuals for Compaq NX7000

Brands by name

Popular brands

HP Compaq NX7000, Reference Manual

Search results

Summary of Contents for Compaq NX7000

Reviews:

Related manuals for Compaq NX7000

Brands by name

Popular brands