HP Compaq NX7000 Reference Manual Download

Page: 24 / 158

Hardware

Keys and Antenna

Top: Keys and Antenna

key

Combines with other keys to perform
system tasks. For example, pressing

Fn+F7

increases screen brightness.

Function keys (12)

Perform system and application tasks.
When combined with the

key, the

function keys

and

through

F12

perform additional tasks as hotkeys.

Keypad keys (15)

Can be used like the keys on an
external numeric keypad.

Applications key

Displays a shortcut menu for items
beneath the pointer.

Antenna (available on select
models and not visible from
outside the notebook)*

Sends and receives wireless device
signals.

Windows logo key

Displays the Windows Start menu.

*The notebook has 2 antennas. The second is on the right side of the
notebook. For optimal transmissions, keep the areas immediately over
theantennas free from obstructions.

2-4

Startup and Reference Guide––Part 2

Summary of Contents for Compaq NX7000































































































































































Search results

Summary of Contents for Compaq NX7000

Reviews:

Related manuals for Compaq NX7000

Brands by name

Popular brands

HP Compaq NX7000, Reference Manual

Search results

Summary of Contents for Compaq NX7000

Reviews:

Related manuals for Compaq NX7000

Brands by name

Popular brands