HP Compaq nc2400 Maintenance And Service Manual Download

Page: 192 / 230

Maintenance and Service Guide

B–1

Backup and Recovery

Backup

HP Backup and Recovery Manager provides several ways to back
up the system and to recover optimal system functionality.

✎

HP installed drivers, utilities, and applications can be copied to
a CD or to a DVD using HP Backup and Recovery Manager.

✎

Formatted DVD±RW discs and DVD±RW double-layer discs
are not compatible with HP Backup and Recovery Manager.

✎

The computer must be connected to external power before you
perform backup and recovery procedures.

Safeguarding Your Data

To safeguard your documents, store personal files in the My
Documents folder and periodically create a backup copy of the
folder.

Backing Up the System

Using HP Backup and Restore Manager, you can

■

Back up specific files and folders.

■

Back up the entire system.

Summary of Contents for Compaq nc2400







































































































































































































































Search results

Summary of Contents for Compaq nc2400

Reviews:

Related manuals for Compaq nc2400

Brands by name

Popular brands

HP Compaq nc2400, Maintenance And Service Manual

Search results

Summary of Contents for Compaq nc2400

Reviews:

Related manuals for Compaq nc2400

Brands by name

Popular brands