HP Compaq dc71 Series Technical Reference Manual Download Page 18

Page: 18 / 212

2-2

361834-002

Technical Reference Guide

System Overview

2.2 Features And Options

This section describes the standard features.

2.2.1 Standard Features

The following standard features are included on all series inless otherwise indicated:

■

Intel Pentium 4 processor in LGA775 (Socket T) package

■

Integrated graphics controller

■

PC2700 and PC3200 DIMMs support on dx6100 and dc7100 models

■

PC2-4300 DIMM support on dx6120 models

■

IDE controller providing serial and parallel ATA support

■

Hard drive fault prediction

■

Eight USB 2.0 ports

■

Audio processor with one headphone output, one microphone input, and one line input

■

Network interface controller providing 10/100/1000Base T support

■

Plug 'n Play compatible (with ESCD support)

■

Intelligent Manageability support

■

Energy Star compliant

■

Security features including:

❏

Flash ROM Boot Block

❏

Diskette drive disable, boot disable, write protect

❏

Power-on password

❏

Administrator password

❏

Serial/parallel port disable

■

PS/2 enhanced keyboard

■

PS/2 scroll mouse

Summary of Contents for Compaq dc71 Series





















































































































































































































Search results

Summary of Contents for Compaq dc71 Series

Reviews:

Brands by name

Popular brands

HP Compaq dc71 Series, Technical Reference Manual

Search results

Summary of Contents for Compaq dc71 Series

Reviews:

Brands by name

Popular brands