Removing the Front Bezel
1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as diskettes or compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION
Regardless of the power-on state, voltage is always present on the system
board as long as the system is plugged into an active AC outlet. You must disconnect the
power cord to avoid damage to the internal components of the computer.
5.
Remove the access panel.
6.
Press the green latch behind the upper right side of the bezel (1) and pull the right side of the bezel
off the chassis (2), then the left side.
Figure 2-4
Removing the Front Bezel
12
Chapter 2 Hardware Upgrades
ENWW
Summary of Contents for Compaq dc5700 SFF
Page 1: ...Hardware Reference Guide dc5700 Small Form Factor Model HP Compaq Business PC ...
Page 4: ...iv About This Book ENWW ...
Page 48: ...42 Chapter 2 Hardware Upgrades ENWW ...
Page 56: ...Padlock Figure C 2 Installing a Padlock 50 Appendix C External Security Devices ENWW ...
