HP Compaq d538 CMT Hardware Reference Manual Download

Page: 75 / 80

Hardware Reference Guide

www.hp.com

G–3

Routine Computer Care and Shipping Preparation

Shipping Preparation

Follow these suggestions when preparing to ship the computer:

1. Back up the hard drive files on PD discs, tape cartridges, CDs,

or diskettes. Be sure that the backup media is not exposed to
electrical or magnetic impulses while stored or in transit.

✎

The hard drive locks automatically when the system power is
turned off.

2. Remove and store any program diskettes from the diskette drives.

3. Insert a blank diskette into the diskette drive to protect the drive

while in transit. Do not use a diskette on which you have stored or
plan to store data.

4. Turn off the computer and external devices.

5. Disconnect the power cord from the electrical outlet, then from

the computer.

6. Disconnect the system components and external devices from

their power sources, then from the computer.

✎

Ensure that all boards are seated properly and secured in the board
slots before shipping the computer.

7. Pack the system components and external devices in their original

packing boxes or similar packaging with sufficient packing
material to protect them.

✎

For environmental nonoperating ranges, see

Appendix A,

“Specifications”

in this guide.

Summary of Contents for Compaq d538 CMT

















































































Search results

Summary of Contents for Compaq d538 CMT

Reviews:

Related manuals for Compaq d538 CMT

Brands by name

Popular brands

HP Compaq d538 CMT, Hardware Reference Manual

Search results

Summary of Contents for Compaq d538 CMT

Reviews:

Related manuals for Compaq d538 CMT

Brands by name

Popular brands