1–18
Hardware Reference Guide
Hardware Upgrades
7. Remove the four screws that secure the drive cage to the front of
the chassis
1
and then remove the single screw that attaches the
lower drive cage to the fixed upper drive cage on the right side of
the chassis
2
.
✎
The HP Compaq d248 Microtower has 3 screw securing the drive
cage to the front of the chassis.
8. Slide the lower drive cage back about 1/2 inch to release it from
the upper cage
3
.
Removing the Lower Drive Cage
To install the lower drive cage, reverse the removal procedure.
Ä
CAUTION:
When installing the retaining screws always use the short
(5/32” long) screw in the side mounting position and the 4 longer screws
on the front of the chassis.
