HP Compaq 6910p, Maintenance And Service Manual

Page: 69 / 168

Primary memory module
Description Spare part number
2048-MB (667-MHz, PC2-5300, 1-DIMM) 446430-001
1024-MB (667-MHz, PC2-5300, 1-DIMM) 446429-001
512-MB (667-MHz, PC2-5300, 1-DIMM) 446431-001
Before removing the primary memory module, follow these steps:
1
. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
. Disconnect all external devices connected to the computer.
3
. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4
. Remove the battery (see Battery on page 42 ).
5
. Release the keyboard (see Keyboard on page 57 ).
Remove the primary memory module:
1
. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The edge of the module opposite the slot rises away from the computer.)
2
. Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the
memory module slot.
Reverse this procedure to install the primary memory module.
Component replacement procedures 61