f
.
Display assembly (see
Display assembly on page 68
)
g
.
Top cover (see
Top cover on page 73
)
Remove the Media Card Reader/USB connector board:
1
.
Disconnect the Media Card Reader/USB connector board cable
(1)
from the system board.
2
.
Remove the three Phillips PM2.5×5.0 screws
(2)
that secure the Media Card Reader/USB connector
board to the computer.
3
.
Lift the Media Card Reader/USB connector board
(3)
straight up and remove it.
Reverse this procedure to install the Media Card Reader/USB connector board.
Component replacement procedures 79