HP Colorado 5GB C4354A Installation Manual Download Page 6

Page: 6 / 56

Installation Guide

G:\TW\Lori\Raptor\C4386-90100\c4386-90100.fm5 Page 6
Last Modified: Tuesday, January 27, 1998 8:17 pm
Printing date: Saturday, April 04, 1998

8. Do you want to install the tape drive in a larger “half-height” drive bay or

a smaller “1-inch” drive bay?

Remove the cover plate from the desired drive bay.

TIP

: Keep any mounting hardware such as rails. You will need this

hardware for securing the drive in step 11.

9. If you are installing the tape drive in a larger “half-height” drive bay, skip

this step.

If you are installing the tape
drive in the smaller “1-inch”
drive bay, remove and discard
the mounting bracket from
the tape drive.

The smaller drive bay
configuration (without
mounting brackets) is
illustrated in the remaining
steps of this guide.

Available half-height drive bay

Available 1-inch drive bay

See your computer’s
manual if you need help
removing the drive bay cover.

(approx. 6” x 1.75”/15cm x 4.5 cm)

(approx. 3.5” x 1”/8.9 cm x 2.54 cm)

Mounting

Bracket

Tape drive

Summary of Contents for Colorado 5GB C4354A

























































Search results

Summary of Contents for Colorado 5GB C4354A

Reviews:

Related manuals for Colorado 5GB C4354A

Brands by name

Popular brands

HP Colorado 5GB C4354A, Installation Manual

Search results

Summary of Contents for Colorado 5GB C4354A

Reviews:

Related manuals for Colorado 5GB C4354A

Brands by name

Popular brands