Installing the Hardware
11
G:\TW\Lori\Raptor\C4386-90100\c4386-90100.fm5 Page 11
Last Modified: Tuesday, January 27, 1998 8:17 pm
Printing date: Saturday, April 04, 1998
One Device
The OPTIONAL data cable that came with
the tape drive is only used if there is no cable
already attached to the recommended IDE
controller in your computer system or the
cable supplied with your computer is not
long enough.
Use the connectors at the two ends of the
cable.
Two Devices
Attach the tape drive to whichever connector
is not in use (center or end) on the data cable
already installed in your computer (DO NOT
swap connectors).
The OPTIONAL data cable that came with
the tape drive is only used instead if there is
no spare connector for the tape drive on
your cable or your cable is not long enough.
Colored stripe
aligned with
IDE controller
Colored stripe
aligned with
Follow the
data cable
already
attached to the
in your
each PIN-1
PIN-1
PIN-1
computer to
locate the IDE
controller
PIN-1
PIN-1
each PIN-1
somewhere inside
your computer
IDE controller
somewhere inside
your computer
PIN-1
other IDE device
Unused connector
HP Colorado tape
drive (either location
not in use)
HP Colorado tape
drive (end of cable)
Summary of Contents for Colorado 5GB C4354A
Page 53: ...Technical Information 53 ...
