background image

5

Removal and replacement procedures for 
authorized service provider parts

IMPORTANT:

Components described in this chapter should be accessed only by an authorized service 

provider. Accessing these parts can damage the computer or void the warranty.

IMPORTANT:

This computer does not have user-replaceable parts. Only HP authorized service providers 

should perform the removal and replacement procedures described here. Accessing an internal part could 
damage the computer or void the warranty.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty, 

are on the service tag at the bottom of your computer. See 

Labels on page 11

 for details. 

NOTE:

HP continually improves and changes product parts. For complete and current information on 

supported parts for your computer, go to 

http://partsurfer.hp.com

, select your country or region, and then 

follow the on-screen instructions.

There are as many as 45 screws that must be removed, replaced, and/or loosened when servicing the parts 
described in this chapter. Make special note of each screw size and location during removal and replacement.

Preparation for disassembly

See 

Removal and replacement procedures preliminary requirements on page 17

 for initial safety procedures.

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

22

Chapter 5   Removal and replacement procedures for authorized service provider parts

Summary of Contents for Chromebook 15 Series





























































Reviews: