c.
Disconnect the webcam/microphone module cable
(2)
from the webcam/microphone module.
d.
Remove the webcam/microphone module.
The webcam/microphone module is available using spare part number 787736-001 for use on all
computer models.
8.
If it is necessary to replace the display hinges:
a.
Remove the display enclosure.
b.
Remove the following screws that secure the display hinges and display hinge support bracket to
the display enclosure:
(1)
Two Phillips PM1.9×2.9 screws that secure the display hinge brackets
(2)
Four Phillips PM2.4×3.1 screws that secure the display hinges
(3)
Two Phillips PM2.4×3.6 screws that secure the display hinges
c.
Remove the display hinges and display hinge support brackets
(4)
.
The TouchScreen display assembly display hinges are included in the Display Hinge Kit, spare part
number:787712-001 for use on all computer models.
9.
If it is necessary to replace the display panel cable:
a.
Disconnect the display panel cable
(1)
from the webcam/microphone module.
b.
Detach the wireless antenna transceiver
(2)
from the display enclosure. (The wireless antenna
transceiver is attached to the display enclosure with double-sided adhesive.)
c.
Release the display panel cable from the routing path
(3)
built into the display enclosure.
Component replacement procedures
43
