Reverse this procedure to install the TouchPad board.
Battery
Description
Spare part number
Battery (3-cell, 36-WHr, 3.25-AHr, Li-ion; includes cable)
767068-001
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover on page 21
).
Remove the battery:
1.
Remove the six Phillips PM1.9×4.2 screws (2) that secure the battery to the base enclosure.
2.
Remove the battery (2).
Reverse this procedure to install the battery.
Connector board
Description
Spare part number
Connector board (includes SD Card Reader slot and cable)
783087-001
28
Chapter 5 Removal and replacement procedures
