manualshive.com logo in svg

HP Business Desktop d500 Series, Service & Reference Manual

The HP Business Desktop d500 Series Reference Manual is a comprehensive guide that provides users with detailed instructions and information about this advanced desktop computer. Easily downloadable and completely free, users can obtain the manual from manualshive.com to optimize their experience with this exceptional product.

Share
Download
background image

3–8

336492-003

Service Reference Guide, d500

Desktop Management

3.4  Asset Tracking and Security

Asset tracking features incorporated into the computer provide key asset tracking data that can be 
managed using HP Insight Manager, HP Client Manager or other system management 
applications. Seamless, automatic integration between asset tracking features and these products 
enables you to choose the management tool that is best suited to your environment and to 
leverage your investment in existing tools. 

HP also offers several solutions for controlling access to valuable components and information. 
Security features such as the Smart Cover Sensor and the Smart Cover Lock, available on select 
models, help to prevent unauthorized access to the internal components of the personal computer. 
By disabling parallel, serial, or USB ports, or by disabling removable media boot capability, you 
can protect valuable data assets. Memory Change and Smart Cover Sensor alerts can be 
automatically forwarded to system management applications to deliver proactive notification of 
tampering with a computer’s internal components.

✎

The Smart Cover Sensor and the Smart Cover Lock are available as options on select systems.

Use the following utilities to manage security settings on your HP computer:

■

Locally, using the Computer Setup Utilities. See the Computer Setup (F10) Utility Guide 
included with the computer for additional information and instructions on using the 
Computer Setup Utilities.

■

Remotely, using HP Client Manager or System Software Manager. This software enables the 
secure, consistent deployment and control of security settings from a simple command-line 
utility.

The following table and sections refer to managing security features of your computer locally 
through the Computer Setup Utilities (F10). 

Security Features Overview 

 

Feature

Purpose

How It Is Established

Removable Media Boot 

Control

Prevents booting from the 

removable media drives.

From the Computer Setup 

Utilities (F10) menu.

Serial, Parallel, USB, or 

Infrared Interface Control

Prevents transfer of data 

through the integrated serial, 

parallel, USB (universal serial 

bus), or infrared interface.

From the Computer Setup 

Utilities (F10) menu.

Power-On Password

Prevents use of the computer 

until the password is entered. 

This can apply to both initial 

system startup and restarts.

From the Computer Setup 

Utilities (F10) menu.

Setup Password

Prevents reconfiguration of the 

computer (use of the Computer 

Setup Utilities) until the 

password is entered.

From the Computer Setup 

Utilities (F10) menu.

✎

For more information about Computer Setup, see the 

Computer Setup (F10) Utility Guide

.

Support for security features may vary depending on your specific computer configuration.

Summary of Contents for Business Desktop d500 Series

















































































































































































































































Reviews:

No comments

Related manuals for Business Desktop d500 Series

Jason.L Literail Workstation 6 Person Assembly Instructions preview
Literail Workstation 6 Person
Brand: Jason.L Pages: 4
Zotac ZBOX EDGE MI623 User Manual preview
ZBOX EDGE MI623
Brand: Zotac Pages: 21
AZZA Genesis 9000 User Manual preview
Genesis 9000
Brand: AZZA Pages: 12
Dell Alienware Area-51m R2 Setup And Specifications preview
Alienware Area-51m R2
Brand: Dell Pages: 21
Dell Alienware Aurora R13 Setup And Specifications preview
Alienware Aurora R13
Brand: Dell Pages: 20
Dell Alienware Aurora R11 Setup And Specifications preview
Alienware Aurora R11
Brand: Dell Pages: 20
Dell Alienware Aurora R3 Manual preview
Alienware Aurora R3
Brand: Dell Pages: 70
Dell Alienware Area-51 ALX Specifications preview
Alienware Area-51 ALX
Brand: Dell Pages: 7
Dell Alienware Aurora - R2 Setup And Specifications preview
Alienware Aurora - R2
Brand: Dell Pages: 17
Dell 3250 Product Manual preview
3250
Brand: Dell Pages: 240
Dell Alienware Area-51m R2 Service Manual preview
Alienware Area-51m R2
Brand: Dell Pages: 94
Dell Alienware 0JYTRGA00 Owner'S Manual preview
Alienware 0JYTRGA00
Brand: Dell Pages: 68
Dell ALIENWARE AURORA Service Manual preview
ALIENWARE AURORA
Brand: Dell Pages: 117
Dell Alienware Aurora R11 Service Manual preview
Alienware Aurora R11
Brand: Dell Pages: 109
Dell Alienware Area-51 ALX Service Manual preview
Alienware Area-51 ALX
Brand: Dell Pages: 103
Dell Alienware Area-51 R5 Service Manual preview
Alienware Area-51 R5
Brand: Dell Pages: 121
Dell Alienware Area-51 R4 Service Manual preview
Alienware Area-51 R4
Brand: Dell Pages: 128
Dell 1555 - Studio - Chainlink Setup Manual preview
1555 - Studio - Chainlink
Brand: Dell Pages: 102

Brands by name

Popular brands

Load more brands