HP Brio BA200 Page 38 User Manual Download

Page: 38 / 96

Troubleshooting Help Zone

Floppy Drive Test Error

Problem

Possible cause

To try and fix this ...

Power-On-Self-Test
displays floppy drive
test error.

The drive is incorrectly
configured in the PC’s

Setup

program. Refer to

page 22.

Switch the PC OFF then ON.

When the message

Press F2 to Enter Setup

appears, press

the

key. Refer to page 22.

Check the floppy disk drive is enabled and that the correct type
is selected (refer to page 38).

The floppy is not working.

Insert a known working floppy disk and see if it works.

Run DiagTools. Refer to page 20.

You may need to update your PC’s Basic Input Output
System (BIOS).

Create a floppy to update your PC’s BIOS. Refer to page 22.

More Advanced Troubleshooting

The drive cables are not
correctly connected.

Disconnect the power cord.

Remove the PC’s cover (refer to page 46).

Check the floppy drive’s power and data cables are correctly
connected (refer to page 51 and page 53).

Close the PC then switch it on and check it works.

The drive cable is not
working.

Disconnect the power cord.

Remove the PC’s cover (refer to page 46).

Replace the floppy drive cable by a known working cable from
the same model of PC.

Close the PC then switch it on and check it works.

The drive is not working.

Disconnect the power cord.

Remove the PC’s cover (refer to page 46).

Replace the floppy drive by a known working drive from the
same model of PC (refer to page 53).

Close the PC then switch it on and check it works.

If the drive works, replace the defective drive.

The system board is not
working.

Disconnect the power cord.

Remove the PC’s cover (refer to page 46).

Replace the system board by a known working board from the
same model of PC (refer to page 48).

Close the PC, reconnect the power cord and check that the PC
and drive work.

Refer to page 38 for more information on troubleshooting floppy drives. If the problem persists, contact your authorized
support provider

BrioGuide.book Page 32 Wednesday, September 1, 1999 2:37 PM

Summary of Contents for Brio BA200

































































































Search results

Summary of Contents for Brio BA200

Reviews:

Related manuals for Brio BA200

Brands by name

Popular brands

HP Brio BA200, User Manual

Search results

Summary of Contents for Brio BA200

Reviews:

Related manuals for Brio BA200

Brands by name

Popular brands