HP Brio 8200, Online Manual, Page: 51 / 86

51
3 Upgrading and Adding Accessories
Adding Accessories
Installing an Expansion Card
1 Remove the computer’s cover (refer to “Removing the Cover” on page 37 ).
2 On a table top turn the computer on to its side, with the system board closest to the surface of the table top.
3 Slide the system board drawer out of the computer chassis as far as the cables connected to the system board permit.
4 Find a free expansion card slot with the correct type of connector ( PCI or ISA , refer to “Adding Expansion Cards” on
page 49 ). Some cards may have preferred locations, in which case special installation instructions should be detailed
in their manuals.
Caution
Static electricity can damage electronic components. Turn off all equipment. Don’t let your clothes touch the
accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing
the accessory from the bag. Handle the accessory as little as possible and with care.