System Unit
Dimensions
Height
14.42 in (36.63 cm)
Depth
20.05 in (50.93 cm)
Width
4.13 in (10.49 cm)
Shipping Dimensions
Height
20.28 in (51.51 cm)
Depth
26.57 in (67.49 cm)
Width
11.42 in (29.00 cm)
Weight
Maximum
53 lbs. (24.04 kg)
Temperature Range
*
Operating
10° to 35° C (50° to 95° F)
Non-Operating
-40° to 60° C (-40° to 140° F)
Storage
-20° to 60° C (-4° to 140° F)
Maximum Wet Bulb
Temperature
30° C (86° F)
Relative Humidity
**
Operating
15% to 80%
Shipping
10% to 90%
Storage
10% to 90%
*All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000
ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000
ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia.
**Storage maximum humidity of 90% is based on a maximum temperature of 45°C (113°F). Altitude
maximum for storage corresponds to a pressure minimum of 70 KPa.
SAS RAID HP p410i
Controller
Disk Drive and Enclosure
Interface
3Gb SAS (Serial Attached SCSI)
SAS Connectors
4 internal (SFF8484) x4 wide port connectors.
Cache Memory Speed
DDR2-800 memory provides up to 4.2GB/s maximum bandwidth
Server Interface
X1 5.0Gbps PCIe provides 1.0GB/s maximum bandwidth
SAS Speed
Fourx1 3G SAS provides 1200MB/s maximum bandwidth.
Cache Memory
Not supported.
Logical Drives Supported
Up to 2 logical volumes
Maximum Logical Drive
Capacity
Up to 64 logical
Host Memory Addressing
64-bit, supporting greater than 4GB server memory space
RAID Support
RAID 0 (striping), RAID 1 (mirroring), and 1+0 (Mirroring and striping) (not
supported with BL8x0c i2 blades)
Upgradeable Firmware
Upgradeable Firmware with Recovery ROM features
Online Drive Flash requires 256MB, 512MB, or 1GB cache module
QuickSpecs
HP Integrity BL870c i2 Server Blade
Technical Specifications
DA - 13620 Worldwide — Version 18 — December 10, 2013
Page 37
