NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Enclosure
NOTE:
FIO indicates that this option is a Factory Installable Option.
Step 1: Choose Required Base Server Blade Configuration
Base Unit
HP Integrity BL870c i2 c7000 Server Blade
NOTE:
Choose the base models.
NOTE:
Adding Option code "#0D1" to the Server Blade P/N will integrate the configured
blade into the enclosure (which must be on the same order)
NOTE:
When adding Option code "#0D1," must select whether server blade should be
installed in an odd slot of the c7000 enclosure (AH383A#001) or in an even slot
(AH383A#002).
AH383A
HP Integrity BL870c i2 c3000 Server Blade
NOTE:
Choose the base models.
NOTE:
Adding Option code "#0D1" to the Server Blade P/N will integrate the configured
blade into the enclosure (which must be on the same order)
NOTE:
When adding Option code "#0D1," must select whether server blade should be
installed in an odd slot of the c3000 enclosure (AH329A#001) or in an even slot
(AH329A#002).
AM329A
Configurable Model ships with:
Eight embedded 10 Gigabit Ethernet NIC ports with Flex-10 support plus (1) additional
10/100 NIC dedicated to Integrity iLO 3 Management
Two Integrated HP p410i hardware RAID controller
Four small form factor (SFF) SAS hot plug hard drive bays
HP Integrity Integrated Lights-Out 3
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted):
HP Processors
NOTE:
Select minimum two (2) and maximum four (4) processors.
Quad-Core Processors
HP BL8x0c i2 Itanium 9320 (1.33GHz/4-core/16MB/155W) Processor Kit
AH386A
HP BL8x0c i2 Itanium 9340 (1.6GHz/4-core//20MB/185W) Processor Kit
AH387A
HP BL8x0c i2 Itanium 9350 (1.73GHz/4-core/24MB/185W) Processor Kit
AH388A
Dual-Core Processor
HP BL8x0c i2 Itanium 9310 (1.6GHz/2-core/10MB/130W) Processor Kit
AH385A
HP Memory
NOTE:
Select minimum two (2) modules per server and maximum twenty four (24)
modules per server if 4 processors ordered.
HP BL8x0c i2 8GB (2x4GB) PC3-10600 Registered CAS 9 Memory Kit
AM327A
HP BL8x0c i2 16GB (2x8GB) PC3-10600 Registered CAS 9 Memory Kit
AM328A
HP BL8x0c i2 32GB (2x16GB) PC3-8500 Registered Memory Kit
AM363A
QuickSpecs
HP Integrity BL870c i2 Server Blade
Configuration Information - Factory Integrated Models
DA - 13620 Worldwide — Version 18 — December 10, 2013
Page 25
