HP BL460c - ProLiant - G5, Maintenance And Service Manual

Page: 35 / 64

Removal and replacement procedures 35
3.
Install the heatsink.
Processor
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent possible server malfunction, do not mix processors of different speeds or cache
sizes. Refer to the label on the processor heatsink for a description of the processor.
CAUTION: To prevent possible server blade overheating, always populate processor socket 2 with a
processor and a heatsink or a processor cover and a heatsink blank.
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the server
blade does not power up.
To remove the component:
1.
Power down the server blade (on page 22 ).
2.
Remove the server blade (on page 22 ).
3.
Remove the access panel (" Access panel " on page 23 ).
4.
Remove all hard drives (" Hard drive " on page 24 ).
5.
Remove all hard drive blanks (" Hard drive blank " on page 23 ).
6.
Remove the hard drive backplane (" Hard drive backplane " on page 26 ).
7.
Remove the front panel/hard drive cage assembly (" Front panel/hard drive cage assembly " on
page 27 ).
8.
Remove the heatsink (" Heatsink " on page 33 ).