HP BL25p - ProLiant - 1 GB RAM User Manual Download Page 33

Page: 33 / 118

Hardware Options Installation

2. Install the hard drive.

3. Determine the status of the hard drive from the hot-plug hard drive LEDs

("Hot-Plug SCSI Hard Drive LED Combinations" on page

4. Resume normal server operations.

Fibre Channel Adapter Option

An optional dual port FC adapter enables FC support for clustering capabilities
and SAN connection when used in conjunction with interconnect devices that
support a SAN connection. Refer to “SAN Configuration (on page

)" for more

information about connecting to the SAN.

Server blades can be configured for SAN connectivity when used with the
following components.

•
•
•
•
•
•

FC Adapter

Supported p-Class server blades

SAN-compatible interconnect

SFP transceivers (included with the Dual Port FC Adapter)

Optical FC cables (not included)

Supported SAN and associated software

Summary of Contents for BL25p - ProLiant - 1 GB RAM























































































































Search results

Summary of Contents for BL25p - ProLiant - 1 GB RAM

Reviews:

Related manuals for BL25p - ProLiant - 1 GB RAM

Brands by name

Popular brands

HP BL25p - ProLiant - 1 GB RAM, User Manual

Search results

Summary of Contents for BL25p - ProLiant - 1 GB RAM

Reviews:

Related manuals for BL25p - ProLiant - 1 GB RAM

Brands by name

Popular brands