8
Bermuda User’s Manual
2. HARDWARE SETUP
2.4 Motherboard Settings
This section explains in detail how to change your motherboard’s function settings
through the use of switches and/or jumpers.
2. H/W SETUP
Motherboard Settings
WARNING!
Computer motherboards and expansion cards contain very delicate
Integrated Circuit (IC) chips. To protect them against damage from static electric-
ity, you should follow some precautions whenever you work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do
not have one, touch both of your hands to a safely grounded object or to a
metal object, such as the power supply case.
3. Hold components by the edges and try not to touch the IC chips, leads or
connectors, or other components.
4. Place components on a grounded antistatic pad or on the bag that came with
the component whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or
remove the ATX power connector on the motherboard.
WARNING!
Make sure that you unplug your power supply when adding or re-
moving system components. Failure to do so may cause severe damage to your
motherboard, peripherals, and/or components. The onboard LED when lit acts as
a reminder that the system is in suspend or soft-off mode and not powered OFF.
1) CPU External Frequency Selection (FS1)
This option tells the clock generator which frequency to send to the CPU,
SDRAM, and the chipset. This allows the selection of the CPU’s External fre-
quency.
Setting
JEN
100 MHz
[1-2]
133 MHz
[2-3]
0
1
0
1
BERMUDA
BERMUDA CPU External Frequency Selection
100MHz
1
2
2
3
FS1
133MHz
