background image

|

4

Only Aruba-approved power cords may be used with Aruba devices. To access the power cord
information for your switch, see the latest edition of the

Installation and Getting Started Guide

for your

switch and power supply. Lost or damaged power cords must be replaced only with Aruba-approved
power cords. If your installation requires a different power cord than the one supplied with the switch
and/or power supply, be sure that the cord is adequately sized for the current requirements of the switch.
In addition, be sure to use a power cord displaying the mark of the safety agency that defines the
regulations for power cords in your country/region. The mark is your assurance that the power cord can
be used safely with the switch and power supply.

Do not use a damaged or non-recommended power cord with your switch. Using such power cords voids the
switch and power supply warranty. It can also cause serious electrical problems, including injury or death to
personnel, and damage to the switch and other property. If you cannot verify that you have a power cord approved
for use with your switch model, contact your authorized Aruba dealer or sales representative for assistance.

Remove the power cord from the switch before mounting or dismounting the switch.

Environmental specifications

Aruba 6300M (JL658A, JL659A,
JL660A, JL661A, JL662A, JL663A,
JL664A, JL762A, R8S89A, R8S90A,
R8S91A, R8S92A)

Aruba 6300F (JL665A, JL666A,
JL667A, JL668A)

Operating
temperature

32°F to 113°F (0°C to 45°C) up to 5000 ft
derate -1°C for every 1000 ft from 5000 ft
to 10000 ft

32°F to 113°F (0°C to 45°C) up to 5000 ft
derate -1°C for every 1000 ft from 5000 ft
to 10000 ft

Operating relative
humidity

15% to 95% @ 104°F (40°C) non-
condensing

15% to 95% @ 104°F (40°C) non-
condensing

Non-operating
temperature

-40°F to 158°F (-40°C to 70°C) up to 15000
ft

-40°F to 158°F (-40°C to 70°C) up to 15000
ft

Non-operating
storage relative
humidity

15% to 90% @ 149°F (65°C) non-
condensing

15% to 90% @ 149°F (65°C) non-
condensing

Max operating
altitude

10000 feet (3 km) Max

10000 feet (3 km) Max

Table 1: Environmental Specifications for all 6300F/M Switch Models

Summary of Contents for aruba 6300M












Reviews: