HP Armada 7800, Appendix

Page: 4 / 20

A-4 Error Messages And Codes
Table A-1 Power-On Messages
Continued
Message Beeps Probable Cause
Bus Master time-out Slot X None Defective board in slot x
Audible 1S Power-On successful
Audible 2S Power-On successful
(RESUME = "F1" KEY) None As indicated to continue
NOTES : 1. L = long beep, S = short beep
2. XX000Y ZZ = Address (XX), byte (Y), data bit (ZZ) of failed memory test
Advanced Diagnostics Error Messages
The following tables list error messages that may occur during Advanced Diagnostics
testing. Depending on installed options, all messages may not apply to all systems.
Processor
Table A-3 lists error messages that relate to the system processor or to other system
board devices.
Table A-3
Processor Error Messages
Message Probable Cause
101 - 01 CPU test failed
101 - 02 32-Bit CPU test failed
101 - 91 Multiplication test failed
101 - 92 Multiplication test failed
101 - 93 Multiplication test failed
101 - 94 Multiplication test failed
102 - 01 Numeric coprocessor initial status word incorrect
102 - 02 Numeric coprocessor initial control word incorrect
102 - 03 Numeric coprocessor tag word not all ones
102 - 04 Numeric coprocessor tag word not all zeros
102 - 05 Numeric coprocessor exchange command failed
102 - 06 Numeric coprocessor masked exception incorrectly handled
102 - 07 Numeric coprocessor unmasked exception incorrectly handled
102 - 08 Numeric coprocessor wrong mask bit set in Status register
102 - 09 Numeric coprocessor unable to store real number
102 - 10 Numeric coprocessor real number calculation test failed
102 - 11 Numeric coprocessor speed test failed
102 - 12 Numeric coprocessor pattern test failed
102 - 15 Numeric coprocessor is inoperative or socket is unoccupied
102 - 16 Weitek coprocessor not responding
102 - 17 Weitek coprocessor failed register transfer test
102 - 18 Weitek coprocessor failed arithmetic operations test
102 - 19 Weitek coprocessor failed data conversion test
102 - 20 Weitek coprocessor failed interrupt test
Continued