Installing the chassis 15
Installing the chassis
Installation overview
To set up and install the chassis:
1.
Unpack the system ("
2.
Determine the chassis rack spacing ("
Determining the chassis rack spacing
3.
Install the rack rails ("
4.
Install the chassis in the rack ("
Installing the chassis in the rack
5.
Install the system components ("
Installing the system components
6.
Install the power shelf ("
Unpacking the system
Unpack the following hardware and prepare for installation:
•
HPE Apollo 6000 System
•
Accessory kit
•
HPE Apollo a6000 Chassis Rail Kit
•
HPE Apollo 6000 Power Shelf Rack Rail Kit
•
HPE Apollo 6000 Power Shelf
The following documents also ship with the Apollo a6000 Chassis:
•
Start Here for Important Setup Information
•
Safety, Compliance, and Warranty Information
Determining the chassis rack spacing
When planning rack spacing, allow enough space for the 5U chassis and the 1.5U power shelf. For more
information, see the
Apollo a6000 Chassis Rail in HPE Racks Installation Instructions.
Installing the rack rails
The chassis requires installation in a rack. To install the rack rails, see the
Apollo a6000 Chassis Rail in
HPE Racks Installation Instructions
on the Hewlett Packard Enterprise website
http://www.hpe.com/info/Apollo_6000/docs
Installing the chassis in the rack
Summary of Contents for Apollo a6000
Page 49: ...Index 49 weight 40 ...