HP Apollo 9000 400dl, Servicing Manual, Page: 274 / 296

C-22 Configuring the EEPROM
Type the command Y if you do want parity checking done by the system unit’s SCSI
interface. Type the command N if you do not want parity checking done. After you
have made your choice, your SCSI menu changes to show your change.
SCSI Bus Address
From the SCSI menu, type the command 4 and the prompt line changes to
3 Bus Address 7
Type 0.. 7 RETURN ?
Type the command for your new SCSI bus address. After you have made your choice,
your SCSI menu changes to show your choice.
After all SCSI features have been changed as you need them, from the SCSI menu,
type the command X to return to the Interface menu.
C.4.7 Local Area Network Configuration
Enter the LAN menu by typing the command key for the LAN and this menu appears:
LAN
Key Feature Value
--------------------------
1 Select Code 21
2 Interrupt Level 5
X to eXit menu
--------------------------
Type [key] RETURN ?
LAN Select Code
From the LAN menu, type the command 1 to change the prompt to
1 Select Code 21
used select codes are :
10 14 15 23
Type 0.. 31 except used RETURN ?
You may change the LAN select code to any number except those already used. Just
type the number for the select code you want, then type < Return > . The LAN menu
will change to show the new select code. Then, exit the menu.