Hardware options installation 136
o
If removed, install the rear option blank.
o
If removed, install the four-bay LFF rear drive cage ("
Install the four-bay LFF hot-plug rear drive
o
If removed, install the six-bay SFF rear drive cage ("
Install the six-bay SFF hot-plug rear drive
o
If removed, install the PCI riser cage (on page
10.
Install the access panel (on page
11.
Install the server into the rack (on page
12.
Power up the server (on page
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker detects a possible compromise of
system integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
•
Always store the recovery key/password in multiple locations.
•
Always store copies of the recovery key/password away from the server.
•
Do not save the recovery key/password on the encrypted hard drive.
Enabling the Trusted Platform Module
CAUTION:
When a TPM is installed and enabled on the server, data access is locked if you
fail to follow the proper procedures for updating the system or option firmware, replacing the
system board, replacing a hard drive, or modifying OS application TPM settings.
1.
During the server startup sequence, press the
F9
key to access System Utilities.
2.
From the System Utilities screen, select
System Configuration
>
BIOS/Platform Configuration
(RBSU)
>
Server Security
.
3.
Select
Trusted Platform Module Options
, and press the
Enter
key
.
