HP AdvanceStack Hub-16U, Installation And Reference Manual, Page: 15 / 70

1. Install add-in modules (optional)
The Hub-16U can be custom-configured by installing an optional HP
AdvanceStack 8U/16U SNMP Module or an HP Transceiver Module.
It may be more convenient to install these optional modules before installing
the hub into a rack or other location. Inspect your installation site and
identify whether the hub’s module slots will be accessible.
HP AdvanceStack 8U/16U SNMP Module
By installing an optional HP J3313A AdvanceStack 8U/16U SNMP Module,
you can configure, monitor, and troubleshoot the hub from a PC running the
ASCII console software or HP Interconnect Manager.
W A R N I N G
Disconnect the power cord from the hub before installing the HP
SNMP or HP Transceiver modules. Electrical shock or other
injury may result if you attempt to install the module without
disconnecting the power cord.
HP AdvanceStack 8U/16U SNMP Module
In
s
ta
ll
in
g
t
h
e
H
u
b
Installing the Hub
1-3