HP A8002A, Installation Manual

Page: 13 / 32

Physical speci fi cations
Table 3 lists the physical speci fi cations.
Table 3 Physical speci fi cations
Parameter Range
Media interface The controller interfaces to the physical media through an FC-0 Media Interface
(FC-PI compliant transceiver), and then connects through a single (FC2142SR
HBA) or dual (FC2242SR and AD300A HBAs) optical fi ber LC connector.
Physical dimensions Low-pro fi le MD2 form factor, 6.600 inches by 2.536 inches, and accommodates
both the full-height and low-pro fi le bracket.
Power requirements
In a PCIe x4 slot:
5.9 watts (typical) at +3.3 VDC
8.5 watts (maximum) at +3.3 VDC
Agency approvals Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1
UL recognized to UL60950-1:2003
CUR recognized to CSA 22.2, No. 60950-1-03
Baurt-certi fi ed by TUV to 60950-1
FCC Rules, Part 15, Class A
Industry Canada, ICES-003, Class A
EMC Directives 89/336/EEC and 2004/108/EC (CE Mark)
EN55022, Class A
EN55024
Australian EMC Framework (C-Tick Mark)
AS/NZS CISPR22:2002 Class A
Japan VCCI, Class A
Taiwan BSMI, Class A
Korea MIC, Class A
Media speci fi cations
Use multimode fi ber optic cable, with short-wave lasers, that adheres to the speci fi cations listed in Table 4 .
Table 4 Media speci fi cations
Fiber Optic cable Maximum length Minimum length Connector
62.5/125 μ m (multimode)
200 MHz km bandwidth
cable
300 meters at
1.0625 Gb/s
150 meters at
2.125 Gb/s
70 meters at 4.25
Gb/s
.5 meters LC
50/125 μ m (multimode)
500 MHz km bandwidth
cable
500 meters at
1.0625 Gb/s
300 meters at
2.125 Gb/s
150 meters at 4.25
Gb/s
.5 meters LC
A8002A PCI-e single-port 4Gb FC adapter and A8003A PCI-e dual-port 4Gb FC adapter for Linux and
Windows systems installation guide
13