28
idle-timeout
minutes
[
seconds
]
undo idle-timeout
View
User interface view
Default level
2: System level
Parameters
minutes
: Specifies the timeout time in minutes, in the range of 0 to 35791. The default value is 10 minutes.
seconds
: Specifies timeout time in seconds, in the range of 0 to 59. The default value is 0 seconds.
Description
Use the
idle-timeout
command to set the idle-timeout timer.
Use the
undo idle-timeout
command to restore the default.
The default idle-timeout is 10 minutes.
NOTE:
•
The system automatically terminates the user’s connection(s) if there is no information interaction
between the device and the users within the idle timeout time.
•
Setting idle-timeout to zero disables the timer. In this case, connections are maintained unless you
terminate them.
Examples
# Set the idle-timeout timer to 1 minute and 30 seconds.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] idle-timeout 1 30
lock
Syntax
lock
View
User view
Default level
3: Manage level
Parameters
None
Description
Use the
lock
command to lock the user interface. This method prevents unauthorized users from using the
user interface.
Summary of Contents for A7500 Series
Page 7: ...v Index 210 ...