background image

Zoning Concepts and Guidelines

54

Zoning Version 3.1.x/4.1.x User Guide

Storage Area Networks

The storage area network brings the connectivity of networks to the SCSI 
protocol. The Fibre Channel standard provides for up to 16 million devices 
attached to the network. This change in scale required a new method to discover 
the devices on the fabric, so that discovery can be accomplished in an acceptable 
time frame. 

The fabric well-known service “nameserver” was implemented to address this 
need. When a device initially accesses the fabric, it must perform a login process. 
During this process the device will register with the nameserver. The nameserver 
records information about the device; that is, protocols supported, World Wide 
Name (WWN), network address, supported class of service, for example.

When an initiator accesses the network it can query the nameserver for all 
attached devices and their capabilities. Any initiator can query (probe) the fabric 
for all targets, and then proceed to initialize the targets and perform I/O. This can 
be disastrous if another initiator is already utilizing the target and has stored data 
on it such as with a disk or tape. The process of zoning is utilized to provide a 
virtual SCSI bus that limits the devices that an initiator can discover and access.

Summary of Contents for A7340A - Surestore FC 1Gb/2Gb Switch 16B









































































































Reviews: