HP 86037B, Instruction Manual

Page: 26 / 204

2-8
Operation
The Main Window
Test Identification area
Use the test identification area to identify the device being measured along
with the operator who runs the test. This information is stored with the test
measurement results. You can also change the labels that are used to identify
each field. For example, you could change the “Fiber” label to read “Multi-
plexer”. To learn how to change the labels,
refer to “Record Labels command”
on page 2-20 .
After entering names into the Test Manager and Operator fields, these names
can then be selected from the drop-down list box rather than typed. For
example, identification numbers for different technicians can be entered in
the Operator field as shown in the following figure.
Click on Edit names to display a dialog box from which you can add, change,
or delete names from the list box.
Labels