HP 8530A, Operating And Programming Manual, Page: 273 / 439

CITIle Reference
T able 15-6. Network Analyzer/Receiver Statements (continued)
Statement Explanation
#NA PARAMS aa Bitmap of valid parameters for a calibration.
Where aa = bit positions 1-8:
Bit #1 = P aram 1
Bit #2 = P aram 2
Bit #3 = P aram 3
Bit #4 = P aram 4
Bit #5 = Service 1 a1
Bit #6 = Service 2 b2
Bit #7 = Service 3 a2
Bit #8 = Service 4 b1
A bit equal to one means that the calibration is valid for that
parameter , a zero means that the calibration is not valid for that
parameter . Bit #0 is the least signicant bit.
#NA POWER1 pp P ower level of signal source #1.
pp = power in dBm.
#NA POWER2 pp P ower level of signal source #2.
pp = power in dBm.
#NA POWER_SLOPE ss Change in power versus frequency for source 1.
ss = dBm/GHz
#NA POWER_SLOPE2 ss Same as POWER_SLOPE but for source 2.
#NA REGISTER nn Register in instrument that the current data package was stored
in.
nn = number of register .
#NA SLOPE_MODE mm On/o ag for source 1 power slope .
mm = 0 is o
mm = 1 is on
#NA SLOPE_MODE2 mm Same as SLOPE_MODE but for source 2.
#NA SPAN xx yy pp The sweep parameters:
xx = start value
yy = stop value
pp = number of points
15-22 Disc Drive Operation