RTC battery
NOTE:
Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all
passwords and CMOS settings to be cleared.
Description
Spare part number
RTC battery
501228-001
Before removing the RTC battery, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 47
).
5.
Remove the memory module (see
Memory module on page 56
).
Remove the RTC battery:
1.
Disconnect the RTC battery cable
(1)
from the system board.
2.
Remove the RTC battery
(2)
from the clip built into the top cover.
Reverse this procedure to install the RTC battery.
78 Chapter 4 Removal and replacement procedures
