h.
Display assembly (see
Display assembly on page 79
)
i.
Top cover (see
Top cover on page 84
)
j.
Speaker assembly (see
Speaker assembly on page 87
)
k.
Modem module (see
Modem module on page 89
)
l.
System board (see
System board and system board frame on page 90
)
Remove the USB/audio board:
1.
Remove the two Phillips PM2.5×4.0 screws
(1)
that secure the USB/audio board to the base
enclosure.
2.
Lift the left side of the USB/audio board
(2)
until the USB and audio connectors disengage from
the openings in the base enclosure.
3.
Remove the USB/audio board and cables from the base enclosure.
Reverse this procedure to install the USB/audio board.
98 Chapter 4 Removal and replacement procedures
