HP 83206A, User Manual

Page: 66 / 312

66
S:\HP83206A\USRGUIDE\MANUAL\cpmeas.fm
Chapter 3, Processing Calls
Configure the Test Set to Emulate a Base Station
Define the settings for the traffic channel that you want your mobile to be assigned to
when establishing a call:
• Choose
DTC
to set up a Digital Traffic channel.
•
Type
:
DTC
•
Band
: Select PCS or Cellular.
•
Chan
: Enter your desired channel number
•
Slot
: Enter your desired slot number.
•
Pwr Lvl
: Enter your desired power level.
•
DVCC
: Enter your desired DVCC.
• Choose
AVC
to set up a Analog Voice channel.
•
Type
:
AVC
•
Chan
: Enter your desired channel number.
•
Pwr Lvl
: Enter your desired power level.
•
SAT
: Choose your desired SAT frequency.
•
Voc:
Select the type of vocoder used by the mobile.
•
VSELP
is most often used for non-PCS compatible mobiles.
•
ACELP
is most often used for PCS-compatible mobiles.
C. Make the following settings on the CAll CONFIGURE II screen:
• Select
CALL CFG2
from the
To Screen
menu.
• Choose
MS Capab
to indicate the type of mobile you are testing.
• Select
Cellular
if the mobile is not PCS-compatible.
• Select
US PCS
if your mobile is PCS-compatible.
• If a PCS Interface is used: Select
Temperature
to compensate for temperature
changes in the PCS Interface.
• Press the PREV key to return the CALL CONTROL screen (or select CALL CNTL
from the
To Screen
menu).