HP 83206A, User Manual

Page: 34 / 312

34
S:\HP83206A\USRGUIDE\MANUAL\getstart.fm
Chapter 1, Getting Started
Get ready to test
Connecting the
Cellular Adapter to
the Test Set
If you purchased the Test Set with the Cellular Adapter (Test Set Option 800 or
801), they probably arrived completely assembled. If you need instructions to
make the connections between the Test Set and the Cellular Adapter, refer to
Chapter 11, “Installing the Cellular Adapter,” on page 285 .
Getting the Test Set
to a Known State
If your Test Set is already on, press PRESET to put it in a known state. If your
Test Set’s power is turned off, press POWER to start the Test Set. If a PCS
interface is connected, turn on the PCS interface before turning on the Test Set.
Selecting the
Proper Notch Filter
for Audio
Measurements
If you want to make audio measurements while testing TIA/EIA-136 mobiles, you
must set the audio frequency notch filter to track AF Generator 1. If you do not
want to make audio measurements, proceed to
“Zeroing the Average Power
Meter” on page 35 .
How to set the audio frequency notch filter to track AF Generator 1
1. Press and release the blue SHIFT key and then the DUPLEX key to display the
CONFIGURE screen.
2. Position the cursor on the
Notch Coupl
field and select
AFGen1
.
Figure 2 Presetting the Test System and Selecting the AFGen1 Notch Filter Selection
PWR REF
UNLOCK
ANALYZER ANALYZER ANALYZER GENERATOR
DATA
CLOCK IN
BASEBAND
DATA IN
TRIGGER
IN
BASEBAND
DATA IN
83 206 A
T D M A C E L L U L A R A D A P T E R
H
DUPLEX
SHIFT
Notch Coupl
CNFG_SCR.pcxf