HP 780019-S01, Maintenance And Service Manual, Page: 49 / 105

Removal and replacement procedures 49
8.
Remove the Express bay bridge card from slot 1.
9.
Remove the 8SFF Express Bay drive backplane.
10.
Remove the 2SFF Express Bay drive backplane (" 2SFF Express Bay drive backplane " on page 44 ).
To replace the component, reverse the removal procedure.
FlexibleLOM
To remove the component:
1.
Power down the server (on page 16 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Disconnect the LAN segment cables.
4.
Do one of the following:
o
Extend the server from the rack (on page 17 ).