HP 705 Workstation User Reference Download

Page: 32 / 84

Chapter 2

SCR Overview

Additional Uses of SCR

Disaster Recovery

SCR can also help with disaster recovery by showing you a comparison
of the system state before and after recovery. To make disaster recovery
most effective, set

scrconfig

to collect data weekly or more often, as

described in step 3 above.

1. After restoring your system, ensure that DMI is installed and all

nodes are configured for access by the CMS.

2. Collect data from the restored system:

# scrupdate -n

node1

3. Make sure the data collection was successful:

# scrstatus

4. Compare that data with the data that existed before the disaster

recovery:

# scrdiff

node1:time node1:lastest

5. Make changes to the system to complete the restoration, if

necessary.

This disaster recovery process can be used for more routine situations,
such as preparing for a reboot or an operating system upgrade.

As you see, SCR is a powerful and flexible tool for system
administration and management. You may devise uses for it that we
have not thought of!

Summary of Contents for 705 Workstation





















































































Search results

Summary of Contents for 705 Workstation

Reviews:

Related manuals for 705 Workstation

Brands by name

Popular brands

HP 705 Workstation, User Reference

Search results

Summary of Contents for 705 Workstation

Reviews:

Related manuals for 705 Workstation

Brands by name

Popular brands