2.
Detach the power/volume button board
(2)
from the display panel assembly. (The power/volume
button board is attached to the display panel assembly with double-sided adhesive.)
3.
Remove the power/volume button board and cable.
Reverse this procedure to install the power/volume button board.
RF cable
Description
Spare part number
RF cable
781979-001
Before removing the RF cable, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the SIM slot cover (see
SIM slot cover on page 13
).
5.
Remove the back cover (see
Back cover on page 14
).
6.
Remove the middle frame (see
Middle frame on page 16
).
7.
Disconnect the battery cable from the system board (see
Battery on page 19
).
Remove the RF cable:
1.
Disconnect the RF cable from the terminals
(1)
on the system board and the USB board.
26
Chapter 5 Removal and replacement procedures
Summary of Contents for 7 VoiceTab
Page 4: ...iv Safety warning notice ...