HP 7 VoiceTab Maintenance And Service Manual Download

Page: 13 / 42

Sequential part number listing

Spare part number

Description

781104-001

Battery, 3000-mAh, USB-charging (includes cable and double-sided adhesive)

781976-001

5-V/1-A AC adapter (includes plug)

781977-001

Antenna (includes double-sided adhesive)

781978-001

Back cover

781979-001

RF cable

781980-001

Middle frame (includes power/volume button actuator, shielding, and speaker gaskets)

781981-001

HP 7 VoiceTab Tablet equipped with a 6.95-in, 600×1024, TN, transmissive LCD, CTP, 5-point
TouchScreen display panel, an MT8382, QC, A7, 1.30-GHz processor, 1.0-GB of system
memory, 8-GB eMMC system storage, and a 3000-mAh, USB-charging battery

781982-001

USB board (includes cable, USB power connector, and bottom speaker cable)

781983-001

Power/volume button board (includes cable, shielding tape, and double-sided adhesive)

781984-001

Display panel assembly, 6.95-in, 600×1024, TN, transmissive LCD, CTP, 5-point TouchScreen

781985-001

Ambient light sensor rubber gasket

781986-001

SIM slot cover

781987-001

Speaker Kit (includes left and right speakers)

781988-001

System board equipped with an MT8382, QC, A7, 1.30-GHz processor, 1.0-GB of system
memory, and 8-GB eMMC system storage

781989-001

0.3-MP front-facing webcam (includes cable and double-sided adhesive)

781990-001

2.0-MP, fixed-focus, rear-facing webcam (includes cable and double-sided adhesive)

782202-001

Receiver module (includes cable and double-sided adhesive)

782203-001

Vibrator module (includes cable and double-sided adhesive)

782205-001

Screw Kit

784238-001

USB extension cable

785809-001

RF board

787828-001

System board with receiver module and vibrator module

791010-001

5.0-MP, auto-focus, rear-facing webcam (includes cable and double-sided adhesive)

Sequential part number listing

Summary of Contents for 7 VoiceTab











































Search results

Summary of Contents for 7 VoiceTab

Reviews:

Related manuals for 7 VoiceTab

Brands by name

Popular brands

HP 7 VoiceTab, Maintenance And Service Manual

Search results

Summary of Contents for 7 VoiceTab

Reviews:

Related manuals for 7 VoiceTab

Brands by name

Popular brands