HP 6200YL Reference Manual Download

Page: 749 / 765

■

ip-addr

-- Specify the IP address the request is for. (IP-ADDR)

(p. 729)

■

all

-- Process the request for all IP addresses.

(p. 715)

rip-compatible

■

vlan

VLAN-ID

ip rip

< V1-only | V2-only | V1-or-V2 >

Define RIP version for incoming and outgoing packets.

Supported Values:

■

V1-only -- Use RIP version 1 only.

■

V2-only -- Use RIP version 2 only.

■

V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.

■

vlan

VLAN-ID

ip rip

IP-ADDR < V1-only | V2-only | V1-or-V2 >

Define RIP version for incoming and outgoing packets.

Supported Values:

■

V1-only -- Use RIP version 1 only.

■

V2-only -- Use RIP version 2 only.

■

V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.

■

vlan

VLAN-ID

ip rip all

< V1-only | V2-only | V1-or-V2 >

Define RIP version for incoming and outgoing packets.

Supported Values:

■

V1-only -- Use RIP version 1 only.

■

V2-only -- Use RIP version 2 only.

■

V1-or-V2 -- Use RIP 2 in the RIP 1 compatible mode.

send

■

vlan

VLAN-ID

ip rip send

< disabled | V1-only | V1-compatible-V2 | ... >

Define RIP version for outgoing packets.

Supported Values:

■

disabled -- Do not send RIP updates.

■

V1-only -- Send RIP version 1 updates only.

■

V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.

■

V2-only -- Send RIP version 2 updates only.

■

vlan

VLAN-ID

ip rip

IP-ADDR

send

< disabled | V1-only | V1-compatible-V2 | ... >

Define RIP version for outgoing packets.

Supported Values:

■

disabled -- Do not send RIP updates.

■

V1-only -- Send RIP version 1 updates only.

■

V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.

■

V2-only -- Send RIP version 2 updates only.

■

vlan

VLAN-ID

ip rip all send

< disabled | V1-only | V1-compatible-V2 | ... >

Define RIP version for outgoing packets.

Supported Values:

■

disabled -- Do not send RIP updates.

747

2009 Hewlett-Packard Development Company, L.P.

vlan

Command Line Interface Reference Guide

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands