link-keepalive
OVERVIEW
Category:
config
Primary context:
Related Commands
Usage: link-keepalive interval <10-100>
link-keepalive retries <3-10>
Description: Configure UDLD on your switch.
The first version of the command is used to configure
keep-alive interval in seconds. Here 10 is 1 sec, 11 is 1.1 sec,
and so on. Default keep-alive interval is 5 seconds.
The second version of the command is used to configure
maximum number of keep-alive attempts. Default keep-alive
attempt is 4.
COMMAND STRUCTURE
■
link-keepalive
< 10 to 100 > -- Set link keep-alive interval in deciseconds.
■
link-keepalive
< 3 to 10 > -- Set maximum number of link keep-alive attempts.
COMMAND DETAILS
interval
■
link-keepalive interval
< 10 to 100 >
Set link keep-alive interval in deciseconds.
Range: < 10 to 100 >
retries
■
link-keepalive retries
< 3 to 10 >
Set maximum number of link keep-alive attempts.
Range: < 3 to 10 >
349
©
2009 Hewlett-Packard Development Company, L.P.
Summary of Contents for 6200YL
Page 2: ......
Page 16: ...Introduction 14 2009 Hewlett Packard Development Company L P ...
Page 22: ...Commands 20 2009 Hewlett Packard Development Company L P ...
Page 764: ......