1
Preparing for installation
Overview
The HP 5830 Switch Series includes the models in
Table 1
:
Table 1
Models in the HP 5830 Switch Series
Product code
HP description
RMN
Alias
JC691A
48G Model Switch with 1
Interface Slot
BJNGA-AC0001 5830AF-48G
JG316A
48G TAA-compliant Model Switch
with 1 Interface Slot
BJNGA-AC0001 5830AF-48G
TAA
JC694A
96G Model Switch
BJNGA-AC0002
5830AF-96G
JG374A
96G TAA-compliant Model Switch
BJNGA-AC0002
5830AF-96G TAA
IMPORTANT:
For regulatory identification purposes, the switches are assigned RMN. These regulatory numbers
should not be confused with the marketing name HP 5830AF, or the product numbers JC691A,
JG316A, JC694A, and JG374A.
Safety recommendations
WARNING!
Read all of the safety instructions in the
Compliance and Safety Gui
de supplied with your device before
installation and operation.
This section provides general recommendations. For more information see the
Compliance and Safety
Guide
included with your device.
•
Turn off all the power and remove all the power cables before opening the chassis.
•
Unplug all power and external cables before moving the chassis.
•
Locate the emergency power off switch before installation and shut off power immediately if
necessary.
•
Always wear an ESD wrist strap when installing the device.
•
Do not stare into the open optical interface; the high power density light can burn the retina.
•
Use a good grounding system to protect your device against lightning shocks, interferences, and
ESD; this is essential to the operating reliability of your switch.
•
Make sure the resistance between the chassis and the ground is less than 1 ohm.
