applications to query Virtual Connect for statistics and trap information.
A robust, scriptable and secure Command Line Interface simplifies
management and enables macros to control common Virtual Connect tasks
Any uplink port can be used as a dedicated mirrored port for traffic analysis
and troubleshooting by a Network Analyzer or Sniffer.
Domain Management of user accounts, enclosure, Virtual Connect domain
settings, and firmware updates
The location and status of Virtual Connect Modules in the HP c-Class Enclosure
and Onboard Administrator can be viewed from the Hardware Status page.
Including at-a-glance detailed information of the hardware elements via
mouse-over pop-up windows.
MAC Address Administration allows local administration of predefined or user-
defined MAC address ranges.
WWN Address Administration allows local administration of predefined WWN
addresses ranges to allow pre-provisioning of SAN volumes
VC manager runs as a high-availability pair when an HP VC Module is installed
in the adjacent bay. All configuration data is stored in flash memory and
checkpointed to the standby module. Configurations can also be backed up to
a workstation via the GUI.
A VC Ethernet module is not required in enclosure interconnect bay 1 or 2
when a VC FlexFabric Module is used in any bay as the primary VC module.
Up to 128 Network Access Groups can be defined to prevent enabling specific
network combinations in the same server profile.
Supported by HP Virtual Connect Enterprise Management v7.2 and higher.
Provides centralized network connection management and workload mobility
for thousands of servers. Learn more at:
www.hp.com/go/vcem
QuickSpecs
HP Virtual Connect FlexFabric 10Gb/24-Port Module
Technical Specifications
DA - 13652 Worldwide — Version 20 — November 5, 2013
Page 21
