Package contents
The HP 527, mounting bracket, screws, MAC address label, and documentation.
Ports
xx
Three Gigabit Ethernet ports
: Auto-sensing 1000Base-T Ethernet ports with RJ-45
connectors.
x
One Gigabit Ethernet uplink port
: Auto-sensing 1000Base-T Ethernet port with RJ-
45 connector.
x
One pair of pass-through ports
: Work with Cat5 cabling as well as an analog
telephone cable.
Radio and antennas
The HP 527 supports IEEE 802.11a/b/g/n/ac. It has two internal antennas
supporting 2x2 MIMO with two spatial streams at a rate of up to 850 Mbps.
Reset button
The reset button is accessible through a hole on the side panel of the HP 527. To reset
the HP 527, insert a paper clip into the reset button hole, and press and quickly
release the button. To reset the HP 527 to factory defaults, press and hold the button
more than 5 seconds until the status LEDs (Power, Radio, and Uplink) flash, then
release.
Status LEDs
Status LEDs power
PoE Out
Uplink
LAN ports 1, 2, and 3
Radio
2
Summary of Contents for 527
Page 20: ... ದ ದ ದ ಉ 20 ...
