PC Card assembly
Description
Spare part number
PC Card assembly
438551-001
PC Card slot bezel
438527-001
Before removing the PC Card assembly, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
Battery on page 31
).
5
.
Remove the following components:
a
.
Hard drive (see
Hard drive on page 32
)
b
.
Memory/WLAN module compartment cover (see
Memory module on page 35
)
c
.
Optical drive (see
Optical drive on page 39
)
d
.
Switch cover (see
Switch cover on page 41
)
e
.
Keyboard (see
Keyboard on page 43
)
f
.
Display assembly (see
Display assembly on page 45
)
g
.
Base enclosure (see
Base enclosure on page 50
)
h
.
Fan assembly (see
Fan assembly on page 53
)
i
.
Heat sink (see
Heat sink on page 55
)
j
.
System board (see
System board on page 60
)
Remove the PC Card assembly:
1
.
Position the system board with the PC Card eject button toward you.
62 Chapter
4
Removal and replacement procedures
Summary of Contents for 520 - Notebook PC
