C15 PDU ROW
JE067A#B2C
C15 to C14 Jumper Cord (ROW)
HP 5120-48G EI Switch with 2 Slots
JE069A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
C15 PDU NA
JE069A#B2B
C15 to C14 Jumper Cord (NA)
C15 PDU ROW
JE069A#B2C
C15 to C14 Jumper Cord (ROW)
HP 5120-48G-PoE+ EI Switch w/2 Intf Slts
JG237A
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
2 port expansion module slots
Power supply included
1U - Height
See Configuration
Note:1, 3, 10
C15 PDU NA
JG237A#B2B
C15 to C14 Jumper Cord (NA
C15 PDU ROW
JG237A#B2C
C15 to C14 Jumper Cord (ROW)
Configuration Rules:
Note 1
The following Transceivers install into this Module:
HP X110 100M SFP LC FX Dual Mode Transceiver
JD497A
HP X110 100M SFP LC LX Dual Mode Transceiver
JD498A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X124 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 3
If the CTO Base Model is ordered #0D1, Then #B2B, or #B2C is Required on the Switch. (Optional when Switch is not
Factory Racked. See Drop down remark in "Remarks" section.)
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 North America — Version 19 — August 19, 2013
Page 12