48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
HP 5120-48G-PoE+ EI Switch w/2 Intf Slts - CTO
JG237AC
48 RJ-45 autosensing 10/100/1000 ports
4 dual-personality ports; PoE auto-sensing 10/100/1000Base-T or SFP
min=0 \ max=4 SFP Transceivers
2 - port expansion module slots
1 - Power Supply Included
1U - Height
See Configuration
Note:1, 3, 5,7
Configuration Rules:
Note 1
The following Transceivers install into this Module: (Use #0D1 if switch is CTO)
HP X110 100M SFP LC FX Dual Mode Transceiver
JD497A
HP X120 1G SFP LC SX Transceiver
JD118B
HP X120 1G SFP LC LX Transceiver
JD119B
HP X120 1G SFP RJ45 T Transceiver
JD089B
HP X120 1G SFP LC BX 10-U Transceiver
JD098B
HP X120 1G SFP LC BX 10-D Transceiver
JD099B
HP X124 1G SFP LC LH40 1310nm Transceiver
JD061A
HP X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HP X125 1G SFP LC LH70 Transceiver
JD063B
Note 3
Localization required on orders without #B2B, #B2C or #B2E options.
Note 5
If this Switch is selected, Then a Minimum of 1 factory integrated accessory must be ordered and integrated to CTO
chassis. See Menu below, option must have a #0D1 to be integrated to the CTO Chassis.
Note 7
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis
and integrated to the JG706A - HP 51xx CTO Enablement. (Max 1 switch per SSP)
Remarks:
Option JxxxxC is used to indicate a Switch Chassis that has factory integrated options BUT NOT integrated into HP
Universal Rack by the HP Factory.
Rack Level Integration CTO Models
Switch Chassis
HP 5120-24G EI Switch
JE066A
QuickSpecs
HP 5120 EI Switch Series
Configuration
DA - 13850 North America — Version 19 — August 19, 2013
Page 10
